Install NDU Gateway as package.

Prerequisites

This guide describes how to install NDU Gateway on CentOS or RHEL.

Step 1. Download the installation package

Download installation package.

wget https://github.com/netcadlabs/ndu-gateway/releases/download/2.0/python3-thingsboard-gateway.rpm

Step 2. Install the gateway using yum

Install NDU Gateway as package and run it as daemon use the following command:

sudo yum install -y ./python3-thingsboard-gateway.rpm

Step 3. Check gateway status

systemctl status thingsboard-gateway

You may notice some errors in the output. However, it is expected, since gateway is not configured to connect to NDU yet:

... python3[7563]: ''2019-12-26 09:31:15' - ERROR - mqtt_connector - 181 - Default Broker connection FAIL with error 5 not authorised!'
... python3[7563]: ''2019-12-26 09:31:15' - DEBUG - mqtt_connector - 186 - "Default Broker" was disconnected.'
... python3[7563]: ''2019-12-26 09:31:16' - DEBUG - tb_client - 78 - connecting to NDU'
... python3[7563]: ''2019-12-26 09:31:17' - DEBUG - tb_client - 78 - connecting to NDU'

Step 4. Configure the gateway

Now you can go to configuration guide to configure the gateway.

NDU Gateway